Seco-Larm SD-9263-KSQ ENFORCER "No Touch" Request-To-Exit Sensor Plate w/Adjustable Delay Timer (Single Gang)      Introduction   The Enforcer Outdoor No Touch Request-to-exit Sensor Is A Full-featured Exit Plate Which Uses Ir Technology To Allow Egress From A Protected Area Or Activate A Device With The Simple Wave Of A Hand. Since It Is No Touch, This Sensor Is Ideal For Use In Hospitals, Clinics, Labs, Cleanrooms (To Reduce The Risk Of Contamination), Schools, Factories, Or Offices.

Features

• No-Touch - Just Wave A Hand In Front Of The Sensor

• Reliable Motion-Sensing IR Technology

• Sensing Range: 2"~7" (5~18cm)

• Reaction Time: 10mS

• Weather-Resistant (IP65) For Outdoor Use (Can Be Used For Indoor Too)

• Clean And Simple No-touch Operation Reduces The Risk Of Cross-Contamination

• Adjustable Sensor Range Up To 7" (18cm)

• Durable, Stainless Steel, Single-Gang Faceplate

• Relay Type: Form C Dry Contact

• SPDT Relay Output, 1.2A@24VDC

• Built-In Timer, Adjustable 0.5~30 Second

• 12/24 VDC Operation

• Current Draw: 25mA@12VDC, 32mA@24VDC

• 1a Relay, Adjustable Trigger Duration 0.8~30 Seconds Or Toggle

• LED Illuminated Sensor Area For Easy Identification

• Selectable LED Colors (Turns From Red To Green Or Green To Red) To Show If The Sensor Is Activated

• Operating Temperature: -4°~131° F (-20°~55° C)

• Dimensions: 23/4" x 41/2" x 15/16" (70 x 115 x 33.5 mm)

• Weight: 108g